DJE Series of Mechanical Pump

รายละเอียดสินค้า

THE PRACTICAL MECHANICAL PUMP

THE PUMPS IN THIS SERIES ARE EXCLUSIVELY DESIGNED TO HANDLE HIGHLY CORROSIVE LIQUIDS. THE SPINDLE, BEARING, AND OTHER SLIDING PARTS ARE SIC CERAMICS, ALLOWING THE PUMP TO HANDLE ALL TYPE OF CHEMICALS INCLUDING STRONG ACIDS /ALKALIES AND ORGANIC SOLVENTS.

ADOPT A INTEGRATED IMPELLER, LONG LIFE, HIGH EFFICIENCY.

THE MOTOR SHAFT EXTENSION IS COUPLED TO A STANDARD MOTOR AND IS MADE OF SUS, A TEFLON SLEEVE IS INSTALLED OVER THE SHAFT, THERE IS NO SOLUTION CONTACT BETWEEN THE SHAFT ASSEMBLY AND THE CHEMICALS OR SOLUTION BEING PUMPED.

IT RESULTS STRONG ACID AND ALKALINE. PLATING SOLUTIONS INCLUDING ELECTROPLATING. CHEMICAL OR WATER RECIRCULATION.

ติดต่อสอบถาม

ข้อมูลจำเพาะของสินค้า

TYPE : DJE
POWER : 0-400W 1-0.75KW 2-1.5KW 3-2.2KW
FREQUENCY : 50HZ 60HZ
VOLTAGE : V32-3-220V V33-3-380V V34-3-415V
MATERIAL : F-GFPP P-PP H-PPH D-PVDF
IN-OUT SIZE : 44-40/40 54-50/40
RUBBER : E-EPDM V-VITON
SPINDLE : C-T-S-SIC SS-SSIC
S.G.: 1-1.1 2-1.2

*** Performance parameters ( The following is in the motor frequency for frequency 50 Hz of value ) ***

ㆍ Shown above the limit is the proportion of the shaft power when the largest, liquid viscosity for 1 mPa ㆍ s value.
ㆍ The key limit refers to than the maximum flow of value, according to the change of flow, proportion limit will also change, such as the need to adjust, please contact us.
ㆍ Environment temperature range: 0 ~ 40 C

*** Performance ***

*** Install Dimension ***

*** Dimension Table ***